GIGABYTE MB GA-E6010N, AMD APU, 2xDDR3, VGA, Mini-ITX

1. Built in an AMD E1-6010 (1.35 GHz) APU with Radeon™ R2 graphics SoC
   * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
2. 2MB L2 cache

1. 2 x DDR3 DIMM sockets supporting up to 32 GB of system memory
   * The maximum 32 GB of system memory can be supported using 16 GB (or above) memory modules. GIGABYTE will update the memory support list on the official website when the memory modules are available on the market.
2. Support for DDR3 1333/1066 MHz memory modules
   (Please refer "CPU Support List" for more information.)

Integrated in the SoC:

1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200
2. 1 x HDMI port, supporting a maximum resolution of 4096x2160
   * Support for HDMI 1.4a version.
3. Maximum shared memory of 2 GB

1. Realtek ALC887 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
   * To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE's website for details on configuring the audio software.
4. Support for S/PDIF Out

Integrated in the SoC:

1. 2 x SATA 6Gb/s connectors

Integrated in the SoC:

1. 2 x USB 3.1 Gen 1 ports on the back panel
2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 2 x SATA 6Gb/s connectors
4. 1 x APU fan header
5. 1 x system fan header
6. 1 x front panel header
7. 1 x front panel audio header
8. 1 x S/PDIF Out header
9. 2 x USB 2.0/1.1 headers
10. 1 x serial port header
11. 1 x chassis intrusion header
12. 1 x Clear CMOS jumper

1. 1 x PS/2 keyboard/mouse port
2. 1 x parallel port
3. 1 x serial port
4. 1 x D-Sub port
5. 1 x HDMI port
6. 2 x USB 3.1 Gen 1 ports
7. 4 x USB 2.0/1.1 ports
8. 1 x RJ-45 port
9. 3 x audio jacks

1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Fan speed control
   * Whether the fan speed control function is supported will depend on the cooler you install.

1. 2 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. Support for DualBIOS™
4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0