HPE FlexNetwork 5140 24G 4SFP+ EI Switch (JL828A) |
I/O ports and slots | 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only |
4 SFP+ fixed 1000/10000 SFP+ ports |
Additional ports and slots | 1 RJ-45 serial console port |
Physical characteristics | Dimensions | 17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height) |
Weight | 5.5 lb (2.5 kg) |
Memory and processor | 512 MB SDRAM, 256 MB flash |
Mounting and enclosure | Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) |
Performance | IPv6 Ready Certified | |
1000 Mb Latency | < 5 µs |
10 Gbps Latency | < 3 µs |
Throughput | 95 Mpps |
Routing/Switching capacity | 128 Gbps |
Routing table size | 1024 entries |
MAC address table size | 16384 entries |
Environment | Operating temperature | 23°F to 113°F (-5°C to 45°C) |
Operating relative humidity | 10% to 90%, noncondensing |
Non-operating/Storage temperature | -40°F to 158°F (-40°C to 70°C) |
Non-operating/Storage relative humidity | 5% to 95%, noncondensing |
Acoustic | High-speed fan: 36.8 dB; ISO 7779 |
Electrical characteristics | Frequency | 50/60 Hz |
Maximum heat dissipation | 64/88 BTU/hr (67.52/92.84 kJ/hr) |
Voltage | 100 - 240 VAC, rated |
Current | 2 A |
Maximum power rating | 24 W |
Idle power | 19 W |
Notes: | - Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. |
Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance |